A corner apartment is located in the end of the construction: that is, part of its walls aren’t adjacent to the neighbours, but are the outer partitions of the home.
There can be one apartment at a corner flat – it occupies the entire end of the home, it’s also known as a corner apartment. Or two – that the windows of one overlook the street, the next – the lawn. Depends on the building program, the design of the premises.
There is also a”separate caste” – casing with walls from the expansion joints. These”gaps” between entrances are usually made in multi-story structures, the major job of the created unit – to break the deformation forces during the shrinkage of the construction, in case of crises. Pros and cons of both corner flats at the joint are somewhat different from the normal ones with access to this road – we’ll pay special attention to this topic in the past section.
Since the 2-3 sides of the room is outside, in winter it is 3-5C colder, and in summer on the opposite – hotter. Especially if the end of the home is heated by sunlight. In some cases, the difference domikday.ru reaches 10C – however such a distinction is improper, indicates that a problem with the exterior of the house – most likely have to get hold of the management business, asking (or forcing) to fulfill their immediate responsibilities, to patch the cracks formed.
Corner flat in a brick house with thick walls is much more comfortable. Such dangers aren’t subjected – the depth of the wall functions as a buffer, so not allowing overheating, overcooling.
When an area has just 1 wall combined with the street, it generally has enough room heat to prevent freezing and warmth. But when there are two outdoor walls, and they are adjacent – there is a high probability of freezing at the corner, the formation of condensation in it, and therefore – mold, fungus. Their spores not just spoil the look of the space, but also cause the look, complication of many serious diseases.
Important! The problems of corner location are justified when the variables are linked – too low temperatures from heating batteries along with dampness is certain to cause moldy walls.